How to Install a Screen Protector

EZ Apply® for Screen Protection Installation (Device Launches Prior to Sept 2025)

PerfectFit for Screen Protection Installation (Device Launches Post August 2025)

The Graphene Advantage

A Step-by-Step Guide to Applying Your InvisibleShield Screen Protector

1. Clean Your Hands and Workspace

  • Wash your hands to remove any oils, dirt, or dust.
  • Work in a clean, dust-free environment with minimal airflow.

2. Clean the Screen Thoroughly

  • Use a microfiber cloth to remove smudges and fingerprints.
  • Use the wet wipe if provided, then dry with a microfiber cloth.
  • Use the dust removal sticker to remove any remaining debris.

3. Align the Screen Protector

  • Hold the InvisibleShield above the screen to check alignment.
  • Ensure perfect fit—no overhanging edges.
  • Use the alignment frame if one is included.

4. Peel Off the Protective Layer

  • Peel back about 1–2 inches of the backing (not all at once).
  • This prevents dust from sticking to the adhesive side.

5. Align and Apply the Protector

  • Align one edge of the protector, then gently lower it.
  • Avoid touching the adhesive—use tape to help hold it if needed.

6. Apply the Protector Slowly

  • Lower it gradually, keeping it aligned as you go.
  • Press gently in the center to help it settle naturally.

7. Remove Air Bubbles

  • Use a credit card or flat tool to push bubbles outward.
  • Work from the center outward with gentle, even pressure.
  • If bubbles persist, carefully lift and reapply that section.

8. Final Check

  • Press down firmly along edges to ensure proper adhesion.
  • Double-check for dust or bubbles before finishing.

Tips for a Perfect Application

  • Dust is your biggest enemy — take your time to ensure the screen is spotless.
  • Use a microfiber cloth to smooth out any stubborn bubbles.
  • Work slowly and carefully to avoid touching the adhesive side.

Tags

InvisibleShield Install Screen Protector