How to Install a Screen Protector

A Step-by-Step Guide to Applying Your InvisibleShield Screen Protector

1. Clean Your Hands and Workspace

• Wash your hands to remove any oils, dirt, or dust.
• Work in a clean, dust-free environment with minimal airflow.

2. Clean the Screen Thoroughly

• Use a microfiber cloth to remove smudges and fingerprints.
• Use the wet wipe if provided, then dry with a microfiber cloth.
• Use the dust removal sticker to remove any remaining debris.

3. Align the Screen Protector

• Hold the InvisibleShield above the screen to check alignment.
• Ensure perfect fit—no overhanging edges.
• Use the alignment frame if one is included.

4. Peel Off the Protective Layer

• Peel back about 1–2 inches of the backing (not all at once).
• This prevents dust from sticking to the adhesive side.

5. Align and Apply the Protector

• Align one edge of the protector, then gently lower it.
• Avoid touching the adhesive—use tape to help hold it if needed.

6. Apply the Protector Slowly

• Lower it gradually, keeping it aligned as you go.
• Press gently in the center to help it settle naturally.

7. Remove Air Bubbles

• Use a credit card or flat tool to push bubbles outward.
• Work from the center outward with gentle, even pressure.
• If bubbles persist, carefully lift and reapply that section.

8. Final Check

• Press down firmly along edges to ensure proper adhesion.
• Double-check for dust or bubbles before finishing.